The latest updated 13-question CompTIA CS0-002 Dumps exam questions are shared for free from the leads4pass IT Certification website.
The leads4pass CS0-002 dumps contain 908 exam questions and answers, candidates can download the complete exam questions and answers by clicking on the link: https://www.leads4pass.com/cs0-002.html, then use the CS0-002 dumps with PDF study documents and VCE exam engine helps you study with ease.
The previously updated CS0-002 PDF study file exam questions can be downloaded for information:
https://drive.google.com/file/d/1tU8_mj_LB2ly3U6RdHvPwoj3HmBecW-m/
https://drive.google.com/file/d/1pYQrY9hcvHs-jTwz3Dr3uXpwVRDdVUFW/
Candidates can also read the 13 most recent CS0-002 Dumps exam questions and answers online:
NEW QUESTION 1:
Employees at a manufacturing plant have been victims of spear phishing, but security solutions prevented further intrusions into the network.
Which of the following is the MOST appropriate solution in this scenario?
A. Continue to monitor security devices
B. Update antivirus and malware definitions
C. Provide security awareness training
D. Migrate email services to a hosted environment
Correct Answer: C
NEW QUESTION 2:
SIMULATION
You are a cybersecurity analyst tasked with interpreting scan data from Company A\’s servers. You must verify the requirements are being met for all of the servers and recommend changes if you find they are not. The company\’s hardening guidelines indicate the following:
TLS 1.2 is the only version of TLS running.
Apache 2.4.18 or greater should be used.
Only default ports should be used.
INSTRUCTIONS Using the supplied data, record the status of compliance with the company\’s guidelines for each server.
The question contains two parts: make sure you complete Part 1 and Part 2. Make recommendations for issues based ONLY on the hardening guidelines provided.
A. Check the below.
B. PlaceHolder
C. PlaceHolder
D. PlaceHolder
Correct Answer: A
Part 1 Answer:
Check on the following:
AppServ1 is only using TLS.1.2
AppServ4 is only using TLS.1.2
AppServ1 is using Apache 2.4.18 or greater
AppServ3 is using Apache 2.4.18 or greater
AppServ4 is using Apache 2.4.18 or greater
Part 2 answer:
Recommendation:
Recommendation is to disable TLS v1.1 on AppServ2 and AppServ3. Also upgrade AppServ2 Apache to version 2.4.48 from its current version of 2.3.48
NEW QUESTION 3:
A security analyst is reviewing a report from the networking department that describes an increase in network utilization, which is causing network performance issues on some systems. A top talkers report over a five-minute sample is included.
Given the above output of the sample, which of the following should the security analyst accomplish FIRST to help track down the performance issues?
A. Perform reverse lookups on each of the IP addresses listed to help determine if the traffic is necessary.
B. Recommend that networking block the unneeded protocols such as Quicktime to clear up some of the congestion.
C. Put ACLs in place to restrict traffic destined for random or non-default application ports.
D. Quarantine the top talker on the network and begin to investigate any potential threats caused by the excessive traffic.
Correct Answer: A
NEW QUESTION 4:
A security analyst\’s daily review of system logs and SIEM showed fluctuating patterns of latency. During the analysis, the analyst discovered recent attempts of intrusion-related malware that overwrites the MBR. The facilities manager informed the analyst that a nearby construction project damaged the primary power lines, impacting the analyst\’s support systems. The electric company has temporarily restored power, but the area may experience temporary outages.
Which of the following issues does the analyst focus on to continue operations?
A. Updating the ACL
B. Conducting backups
C. Virus scanning
D. Additional log analysis
Correct Answer: C
NEW QUESTION 5:
HOTSPOT
Welcome to the Enterprise Help Desk System. Please work on the ticket escalated to you in the help desk ticket queue.
INSTRUCTIONS
Click on the ticket to see the ticket details. Additional content is available on tabs within the ticket.
First, select the appropriate issue from the drop-down menu. Then, select the MOST likely root cause from the second drop-down menu.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
Hot Area:
Correct Answer:
NEW QUESTION 6:
A security analyst is building a malware analysis lab. The analyst wants to ensure malicious applications are not capable of escaping the virtual machines and pivoting to other networks. To BEST mitigate this risk, the analyst should use __.
A. an 802.11ac wireless bridge to create an air gap.
B. a managed switch to segment the lab into a separate VLAN.
C. a firewall to isolate the lab network from all other networks.
D. an unmanaged switch to segment the environments from one another.
Correct Answer: B
NEW QUESTION 7:
SIMULATION
Malware is suspected on a server in the environment.
The analyst is provided with the output of commands from servers in the environment and needs to review all output files in order to determine which process running on one of the servers may be malware.
INSTRUCTIONS
Servers 1, 2, and 4 are clickable. Select the Server and the process that hosts the malware.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
A. Check the below.
B. PlaceHolder
C. PlaceHolder
D. PlaceHolder
Correct Answer: A
Server 4, svchost.exe
NEW QUESTION 8:
Which of the following concepts refers to the software assurance method of ensuring a program can handle the required bandwidth?
A. Stress test
B. Input validation
C. Load balancing
D. Dynamic analysis
Correct Answer: A
NEW QUESTION 9:
The Chief Information Security Officer (CISO) asked for a topology discovery to be conducted and verified against the asset inventory. The discovery is failing and not providing reliable or complete data. The Syslog shows the following information:
Which of the following describes the reason why the discovery is failing?
A. The scanning tool lacks valid LDAP credentials.
B. The scan is returning LDAP error code 52255a.
C. The server running LDAP has antivirus deployed.
D. The connection to the LDAP server is timing out.
E. The LDAP server is configured on the wrong port.
Correct Answer: A
NEW QUESTION 10:
Which of the following tools should an analyst use to scan for web server vulnerabilities?
A. Wireshark
B. Qualys
C. ArcSight
D. SolarWinds
Correct Answer: B
NEW QUESTION 11:
A storage area network (SAN) was inadvertently powered off while power maintenance was being performed in a datacenter. None of the systems should have lost all power during the maintenance. Upon review, it is discovered that a SAN administrator moved a power plug when testing the SAN\’s fault notification features.
Which of the following should be done to prevent this issue from reoccurring?
A. Ensure both power supplies on the SAN are serviced by separate circuits so that if one circuit goes down, the other remains powered.
B. Install additional batteries in the SAN power supplies with enough capacity to keep the system powered on during maintenance operations.
C. Ensure power configuration is covered in the data center change management policy and has the SAN administrator review this policy.
D. Install a third power supply in the SAN so the loss of any power intuit does not result in the SAN completely powering off.
Correct Answer: A
NEW QUESTION 12:
A security analyst\’s company uses RADIUS to support a remote sales staff of more than 700 people. The Chief Information Security Officer (CISO) asked to have IPSec using ESP and 3DES enabled to ensure the confidentiality of the communication as per RFC 3162. After the implementation was complete, many sales users reported latency issues and other performance issues when attempting to connect remotely.
Which of the following is occurring?
A. The device running RADIUS lacks sufficient RAM and processing power to handle ESP implementation.
B. RFC 3162 is known to cause significant performance problems.
C. The IPSec implementation has significantly increased the amount of bandwidth needed.
D. The implementation should have used AES instead of 3DES.
Correct Answer: A
NEW QUESTION 13:
A managed security service provider (MSSP) has alerted a user that an account was added to the local administrator group for the servers named EC2AMAZ-HG87B4 and EC2AMAZ-B643M2. A security analyst logs in to the cloud provider\’s graphical user interface to determine the IP addresses of the servers and sees the following data:
Which of the following changes to the current architecture would work BEST to help the analyst to troubleshoot future alerts?
A. Rename all hosts to the value listed in the instance ID field.
B. Create a standard naming convention for all hostnames.
C. Create an asset tag that identifies each instance by hostname.
D. Instruct the MSSP to add the platform name from the cloud console to all alerts.
Correct Answer: C
…
Click Save if you want to download the latest CS0-002 dumps exam questions and answers above:https://drive.google.com/file/d/1W9HKnVGNzgIcmgO-s2OFwk6UfO8o8o_g/
The CompTIA CS0-002 certification exam is one of the CompTIA CySA+ exams and is very popular. Candidates can study some of the exam content through the CS0-002 free exam questions provided by leads4pass.
For candidates to 100% pass the CS0-002 CompTIA Cybersecurity Analyst certification exam, you are welcome to practice the 908 leads4pass CS0-002 Dumps exam questions: https://www.leads4pass.com/cs0-002.html to help you succeed easily.