New N10-007 dumps contain 1251 exam questions and answers and are the best material for preparing for the CompTIA Network+ certification exam.
Using N10-007 dumps: https://www.leads4pass.com/n10-007.html Select the latest updated N10-007 dumps PDF, N10-007 dumps VCE or “PDF + VCE”, Help candidates pass the CompTIA Network+ certification exam with ease.
Download Free Share N10-007 Dumps PDF: https://drive.google.com/file/d/1rZUdLDhU9j7-8ur7rzPBWOJ_78dakfEJ/
Read the latest free N10-007 Dumps exam questions and answers online:
| Number of exam questions | Exam name | From | Release time updated |
| 15 | CompTIA Network+ Certification Exam | Lead4Pass | Apr 4, 2022 |
New Question 1:
SIMULATION
Your company recently purchased a new building down the street from the existing office. For each of the tasks below, select the appropriate antenna type and encryption object for all wireless access points (AP).
1.
Create an encrypted wireless connection between the two buildings that BEST controls signal propagation while maximizing security.
2.
Restrict the wireless signal generated by the access points (APs) inside Building 1, so that it minimizes broadcast beyond the building.
3.
Maximize wireless coverage inside Building 1.
4.
Building 1\’s internal wireless network is for visitors only and must not require any special configuration on the visitor\’s device to connect. Instructions: When you have completed the simulation, select the Done button to submit.
Select and Place:
Correct Answer:
New Question 2:
DRAG DROP
You have been tasked with testing a CAT5e cable. A summary of the test results can be found on the screen.
Instructions
Step 1: Select the tool that was used to create the cable test results.
Step 2: Interpret the test results and select the option that explains the results. After you are done with your analysis, click the ‘Submit’ button.
Step 3: You have determined that the original crimp is faulty. Re-crimp the cable connector using the T568B cabling standard. Choose the correct cable for each pin in the connector by clicking on the pin and selecting a cable color.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
Select and Place:
Correct Answer:
Reference: https://www.comms-express.com/infozone/article/t568a-and-t568b/
New Question 3:
Workstations are unable to access the Internet after a recent power outage. Configure the appropriate devices to ensure ALL workstations have Internet connectivity. Instructions: All ports can be enabled (green) or disabled (red). When you have completed the simulation please select the Done button.
Hot Area:
Correct Answer:
All ports should be enabled.
New Question 4:
You have been tasked with testing a CAT5e cable. A summary of the test results can be found on the screen.
Step 1: Select the tool that was used to create the cable test results.
Step 2: Interpret the test results and select the option that explains the results. After you are done with your analysis, click the ‘Submit Cable Test Analysis’ button.
Hot Area:
Correct Answer:
A Cable Certifier provides “Pass” or “Fail” information in accordance with industry standards but can also show detailed information when a “Fail” occurs. This includes shorts, the wire pairs involved and the distance to the short. When a short is identified, at the full length of the cable it means the cable has not been crimped correctly.
New Question 5:
HOTSPOT Corporate headquarters provided your office with a portion of their class B subnet to use at a new office location. Range Given: 172.30.232.0/24
Sales
57 devices
HR
23 devices
IT
12 devices
Finance 32 devices
Marketing 9 devices
INSTRUCTIONS
Allocate the minimum number of addresses (using CIDR notation) needed to accommodate each department.
After accommodating each department, identify the unused portion of the subnet by responding to the question on the graphic.
All drop-downs must be filled.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
Hot Area:
Correct Answer:
New Question 6:
You have been tasked with implementing an ACL on the router that will:
1.
Permit appropriate, secure remote-access technologies from the management network to all other local network segments. Explicitly deny all other traffic from the management network
2.
Ensure the user subnet cannot remotely manage devices in the Linux and Windows Server segments
3.
Prohibit any traffic that has not been specifically allowed.
Correct Answer:
See the image for the solution.
New Question 7:
When configuring a wireless access point, Zach, a network administrator, needs to determine the MAC address of a local printer. Which of the following commands would be MOST helpful in determining the MAC address?
A. ping
B. arp
C. route
D. dig
Correct Answer: B
New Question 8:
Kim, the client, has requested a cost-effective network solution to accommodate the ability to reconfigure the office space as needed. Which networking solution would provide the BEST solution?
A. Private IP Addressing
B. Wireless Access Points
C. Wide Area Networking
D. Virtual Local Area Networks
Correct Answer: B
New Question 9:
A SOHO office recently installed a wireless network for employees to use during lunch breaks. As such, the access point was placed in the kitchen area by the microwave. Employees have been reporting intermittent connectivity when using the wireless network. Which of the following would BEST improve connectivity?
A. Disable SSID broadcast
B. Increase the signal strength
C. Move the access point
D. Change the broadcast channel
Correct Answer: C
New Question 10:
A SOHO with ten Wi-Fi-equipped laptops needs a new network installed. Which of the following items would be used to set up the office using a new DSL line? (Select TWO).
A. Router
B. Wi-Fi Access point
C. Cable modem
D. Ten WiMAX adapters
E. Ten CAT6 patch cables
Correct Answer: AB
New Question 11:
Which of the following security threats relies primarily on user deception and misinformation?
A. Rogue access points
B. DoS attacks
C. Man-in-the-middle attacks
D. Phishing
Correct Answer: D
New Question 12:
At which of the following layers of the OSI model do packets exist?
A. Network
B. Session
C. Data link
D. Transport
Correct Answer: A
New Question 13:
A company is having a new T1 line installed. Which of the following will the connection MOST likely terminate?
A. Core switch
B. MDF
C. Ethernet router
D. IDF
Correct Answer: B
New Question 14:
A technician needs to test the length of a newly installed cable run because it is believed that it exceeds the maximum specification length. Which of the following tools should be used?
A. Cable certifier
B. Toner probe
C. Cable tester
D. Protocol analyzer
Correct Answer: A
New Question 15:
Which of the following layers of the OSI model is between the Data Link and Transport layers?
A. Application
B. Session
C. Network
D. Physical
Correct Answer: C
…
Lead4Pass N10-007 dumps have been updated to the latest version. It has been verified by the actual test room and is real and effective. It is the best exam material for the CompTIA Network+ certification exam. Download N10-007 dumps with PDF and VCE: https://www.leads4pass.com/n10-007.html (1251 Q&As)
Help candidates pass 100% of CompTIA Network+ certification exams.
BTW, share part of N10-007 Dumps PDF online download for free:
https://drive.google.com/file/d/1rZUdLDhU9j7-8ur7rzPBWOJ_78dakfEJ/